====== Ninebot E-Moped error codes ====== ^ Error ^ Description ^ Additional information ^ Affected hardware | ^ E0 | ECU communication error | - | IoT | ^ E1 | Backup battery abnormal | - | IoT | ^ E2 | RTC clock error | - | IoT | ^ E3 | File system error | - | IoT | ^ E4 | I2C communication error | - | IoT | ^ E5 | GNSS communication error | - | IoT | ^ E6 | 4G modem communication error | - | IoT | ^ E7 | Bluetooth communication error | - | IoT | ^ E8 | NFC communication error | - | IoT | ^ E9 | G-sensor communication errror | - | IoT | ^ 10 | ESC communication error. | Check the connection between dashboard and ESC. | ESC/Dashboard | ^ 11 | Motor controller undervoltage protection | Charge the battery | Drive | ^ 12 | Motor Hall failure | Check the motor, motor controller and the connecting cables | Drive | ^ 13 | MOS tube malfunction | Check the motor, motor controller and the connecting cables | Drive | ^ 14 | Throttle malfunction | Check the throttle handle, motor controller and the connecting cables | ESC/Dasboard | ^ 15 | Brake malfunction | Check the brake handle, motor controller and the connecting cables | ESC/Dasboard | ^ 16 | An error occurred when saving the configuration | Replace the ESC | ESC | ^ 17 | Dashboard communication error | Check dashboard cables | Dashboard | ^ 18 | Dashboard temperature abnormal | - | Dashboard | ^ 19 | Battery 1 temperature abnormal | - | BMS | ^ 20 | Battery 1 communication error | Check battery cables and connectors | BMS | ^ 21 | BMS of battery 1 has default SN | Change BMS 1 SN | BMS | ^ 22 | Battery 1 password error | - | BMS | ^ 23 | Battery 2 temperature error | - | BMS | ^ 24 | Battery 2 communication error | Check battery cables and connectors | BMS | ^ 25 | BMS of battery 2 has default SN | Change BMS 2 SN | BMS | ^ 26 | Battery 2 password error | - | BMS | ^ 27 | Battery 1 update error | - | BMS | ^ 28 | Battery 2 update error | - | BMS | ^ 31 | ESC has default serial number | Change ESC SN | ESC | ^ 32 | ESC password error | - | ESC | ^ 33 | Firmware save error | The dashboard firmware upgrade has failed | Dashboard | ^ 34 | ESC temperature abnormal | - | ESC | ^ 35 | Communication Failure between Dashboard and ESC. | Check the connection between dashboard and ESC. \\ ESC is possibly soft-bricked; try to flash ESC with ST-Link | ESC/Dasbiard | ^ 38 | Electric lock malfunction | Check whether the cables are short-circuited or broken | ESC | ^ 39 | Seat unlocked | - | ESC | ^ 41 | Handlebar unlocked | Turn on the scooter and move the handlebars to the left | Dashboard | ^ 42 | Rear storage box unlocked | - | ESC | ^ 47 | Battery compartment unlocked | - | ESC | \\