As of 1st March 2021, the app is compatible with following models
Xiaomi M365
Xiaomi M365 Pro
Xiaomi 1s
Xiaomi Lite/Essential
Xiaomi M365 Pro 2
Ninebot Max G30
Ninebot Max G30D
Ninebot ES1/ES2/ES4
Ninebot E22/E25/E45
Ninebot T15
Main screen shows basic information about the connected vehicle
Below, flashing options are presented
Show params - displays parameters of currently loaded ZIP file
Load ZIP - opens file manager to let user select source ZIP file
Load Original - flashes original, vanilla, DRV and BLE
Load Custom - opens CFW manager and lets user generate cfw directly
FLASH - begins flashing procedure
Tools section is divided into options:
Change Region - allows to change serial number for the connected vehicle
Commands - allows acting on registers to enable KERS, DPC, lock, reboot, and others
Automate - sends a user-specified command on connection (for example, DPC reg activation)
Lock - locks the scooter in always on mode, ebrake is applied to prevent theft
Cruise Control - activates time-delayed cruise control, unless it has been disabled in firmware
Direct power control (DPC) - activates DPC reg for firmware with “Switchable, register” or “Switchable, brake” DPC option enabled
Always on tail light - forces tail light always ON