User Tools

Site Tools


cfwbuilder

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
cfwbuilder [2021/02/24 18:28] – restored bugged edit tidingscfwbuilder [2022/10/24 19:23] (current) – old revision restored (2022/10/24 19:22) lothean
Line 11: Line 11:
 |Ninebot Max|[[http://api.cfw.sh/max|Online]]|max| |Ninebot Max|[[http://api.cfw.sh/max|Online]]|max|
 |Ninebot E2x|WIP|//e2x // (might change before release)| |Ninebot E2x|WIP|//e2x // (might change before release)|
-|Xiaomi M365|Outdated|N/A (non-migrated)|+|Xiaomi M365|Discontinued|N/A (non-migrated)|
 |Xiaomi M365 Pro|[[https://api.cfw.sh/pro|Online]] (beta)|pro| |Xiaomi M365 Pro|[[https://api.cfw.sh/pro|Online]] (beta)|pro|
-|Xiaomi 1S|[[http://api.cfw.sh/1s|Online]] (beta)|1s|+|Xiaomi 1S|Discontinued|1s|
 |Xiaomi M365 Pro 2|[[http://api.cfw.sh/pro2|Online]] (beta)|pro2| |Xiaomi M365 Pro 2|[[http://api.cfw.sh/pro2|Online]] (beta)|pro2|
  
Line 26: Line 26:
 |version|Firmware version|string|DRVxxx|DRVxxx|Base version. See [[:cfwbuilder#drv_versions_table|the below table]]. **VALID PARAMETER REQUIRED FOR FILE DOWNLOAD.** |  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |version|Firmware version|string|DRVxxx|DRVxxx|Base version. See [[:cfwbuilder#drv_versions_table|the below table]]. **VALID PARAMETER REQUIRED FOR FILE DOWNLOAD.** |  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |output|Output file|string|zip2|See [[:cfwbuilder#output_file_formats_table|the below table]].|If you want to use another output format for the custom firmware.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |output|Output file|string|zip2|See [[:cfwbuilder#output_file_formats_table|the below table]].|If you want to use another output format for the custom firmware.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
-|voltage|Voltage|integer|36|36;48|Voltage set|   |  ✅  |   |    ✅  |+|voltage|Voltage|integer|36|36;48|Voltage set|  ✅  |    ✅  | | |
 |name|Filename|string|None|<any ASCII string up to 40chars>|Replaces the time-based part of the filename by any custom name.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |name|Filename|string|None|<any ASCII string up to 40chars>|Replaces the time-based part of the filename by any custom name.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |version_spoofing|Version spoofing|bool|None|<any string>|Sets DRV version higher to prevent an update from overwriting it.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |version_spoofing|Version spoofing|bool|None|<any string>|Sets DRV version higher to prevent an update from overwriting it.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
Line 37: Line 37:
 |p_drive|Drive battery current|int|(per model)|5000→65535|Sets battery current limit for all Drive modes.|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  | |p_drive|Drive battery current|int|(per model)|5000→65535|Sets battery current limit for all Drive modes.|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  |
 |p_eco|Eco battery current|int|(per model)|5000→65535|Sets battery current limit for Eco mode.|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  | |p_eco|Eco battery current|int|(per model)|5000→65535|Sets battery current limit for Eco mode.|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  |
-|i_sports|Sports phase current|int|(per model)|10000→65535|Sets phase current limit for Sport mode|**⏳**   |  ✅  |  ✅  |  ✅  |  ✅  | +|i_sports|Sports phase current|int|(per model)|10000→65535|Sets phase current limit for Sport mode|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  | 
-|i_drive|Drive phase current|int|(per model)|10000→65535|Sets phase current limit for Drive mode|**⏳**   |  ✅  |  ✅  |  ✅  |  ✅  |+|i_drive|Drive phase current|int|(per model)|10000→65535|Sets phase current limit for Drive mode|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  |
 |direct_power_control|Direct power control state|string|off|See [[:cfwbuilder#direct_power_control_state_table|the below table]].|Direct Power Control changes the throttle algorithm from speed to power-based, like in a thermal-engine vehicle. No speed limit applies while using DPC.|  **⏳**    |  ✅  |  **⌛**    |  **⌛**    |  ✅  | |direct_power_control|Direct power control state|string|off|See [[:cfwbuilder#direct_power_control_state_table|the below table]].|Direct Power Control changes the throttle algorithm from speed to power-based, like in a thermal-engine vehicle. No speed limit applies while using DPC.|  **⏳**    |  ✅  |  **⌛**    |  **⌛**    |  ✅  |
 |direct_power_control_curve|Direct power control curve type|string|flat|flat; quadratic|Sets DPC curve type.|  **⏳**    |  ✅  |  **⌛**    |  **⌛**    |  ✅  | |direct_power_control_curve|Direct power control curve type|string|flat|flat; quadratic|Sets DPC curve type.|  **⏳**    |  ✅  |  **⌛**    |  **⌛**    |  ✅  |
-|current_raising_coefficient|Current raising coefficient|int|300|0→65535|How fast current will be applied. Affecting throttle speed up rate.|✅  |✅  |✅  |✅  |✅  |+|current_raising_coefficient|Current raising coefficient|int|300|0→16000|How fast current will be applied. Affecting throttle speed up rate.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |no_kers|No KERS|bool|None|<any string>|Disables energy recovery when the throttle is inactive. Clonk-free.|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  | |no_kers|No KERS|bool|None|<any string>|Disables energy recovery when the throttle is inactive. Clonk-free.|  **⏳**    |  ✅  |  ✅  |  ✅  |  ✅  |
 |kers_min_spped|Minimum speed for engaging KERS|int|6|0→65|Sets minimum threshold for KERS activation|  ✅  |  ✅  |  **❌**    |  **❌**    |  **❌**    | |kers_min_spped|Minimum speed for engaging KERS|int|6|0→65|Sets minimum threshold for KERS activation|  ✅  |  ✅  |  **❌**    |  **❌**    |  **❌**    |
Line 50: Line 50:
 |brake_i_min|Minimum phase current|int|8000|1000→55000|Sets minimum phase current|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |brake_i_min|Minimum phase current|int|8000|1000→55000|Sets minimum phase current|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |brake_i_max|Maximum phase current|int|30000|1000→55000|Sets maximum phase current|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |brake_i_max|Maximum phase current|int|30000|1000→55000|Sets maximum phase current|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
-|brake_current_raising_coefficient|Brake current raising coefficient|int|500|0→65535|How fast current will be applied. Affecting brake speed up rate|✅  |✅  |✅  |✅  |✅  |+|brake_current_raising_coefficient|Brake current raising coefficient|int|500|0→16000|How fast current will be applied. Affecting brake speed up rate|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |brake_min_speed|Minimum speed for applying brake|int|3|0→255|Minimum speed at which electronic brake can be applied|  **⏳**    |  ✅  |  **⏳**    |  **⏳**    |  ✅  | |brake_min_speed|Minimum speed for applying brake|int|3|0→255|Minimum speed at which electronic brake can be applied|  **⏳**    |  ✅  |  **⏳**    |  **⏳**    |  ✅  |
 |no_brake_light_flash|Static brake light|bool|None|<any string>|Enforces German brake light behavior for other regions.|  **❌**    |  ✅  |  **⏳**    |  **⏳**    |  ✅  | |no_brake_light_flash|Static brake light|bool|None|<any string>|Enforces German brake light behavior for other regions.|  **❌**    |  ✅  |  **⏳**    |  **⏳**    |  ✅  |
 +|brake_light_mode|Brake light behavior|string|default|default;static \\
 +   ;reversed;strobe|Sets brake light behavior|  **❌**    |  **❌**    |  ✅  |  ✅  |  **❌**    |
 |cruise_control_delay|Cruise control delay|int|5|0→10|How many seconds it takes for cruise control to kick in.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |cruise_control_delay|Cruise control delay|int|5|0→10|How many seconds it takes for cruise control to kick in.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
-|cruise_control_nobeep|No cruise control beep|bool|None|<any string>| |  **⏳**    |  ✅  |  **⏳**    |  **⏳**    |  **⏳**    |+|cruise_control_nobeep|No cruise control beep|bool|None|<any string>||  **⏳**    |  ✅  |  **⏳**    |  **⏳**    |  **⏳**    |
 |motor_start_speed|Motor start speed|int|5|0→10|Minimum speed in km/h before the motor will start.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |motor_start_speed|Motor start speed|int|5|0→10|Minimum speed in km/h before the motor will start.|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |boot_workmode|Force boot power mode|int|3|0: Drive; 1: Eco; 2: Sports; 3: Don't patch|Enforces selected power mode at boot.|  **⌛**    |  ✅  |  **⌛**    |  **⌛**    |  **⏳**    | |boot_workmode|Force boot power mode|int|3|0: Drive; 1: Eco; 2: Sports; 3: Don't patch|Enforces selected power mode at boot.|  **⌛**    |  ✅  |  **⌛**    |  **⌛**    |  **⏳**    |
Line 62: Line 64:
 |bms_uart_76800|Change ESC↔BMS baud rate to 76800|bool|None|<any string>|Only if you use the compatible open source BMS!|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  | |bms_uart_76800|Change ESC↔BMS baud rate to 76800|bool|None|<any string>|Only if you use the compatible open source BMS!|  ✅  |  ✅  |  ✅  |  ✅  |  ✅  |
 |m365_compat|Pro1 FW on classic BLE|string|off|on;off|Changes dashboard message type from "Pro" to "Regular" (for 4-dot M365 dashboard only!).|  **❌**    |  **❌**    |  **❌**    |  **❌**    |  ✅  | |m365_compat|Pro1 FW on classic BLE|string|off|on;off|Changes dashboard message type from "Pro" to "Regular" (for 4-dot M365 dashboard only!).|  **❌**    |  **❌**    |  **❌**    |  **❌**    |  ✅  |
 +|compat_patches|Removes SN check|bool|None|<any string>|Removes disability to change serial number on some ESCs|  **❌**    |  ✅  |  ✅  |  ✅  |  **❌**    |
  
 Please note that all parameters might not be listed. Please note that all parameters might not be listed.
Line 92: Line 95:
  
 Case sensitive.\\ Case sensitive.\\
-Defaults to "**zip2**" if not provided.+Defaults to "**zip3**" if not provided.
  
 **"bin": **Barebone final product, binary output. For devs only. **"bin": **Barebone final product, binary output. For devs only.
Line 100: Line 103:
 **"zip":** [[:downg#zip_files|CamiAlfa's DownG ZIP]]. Still used by BotoX and many third-party websites, but still does the job for scooters of older generations. Mostly used by Android flashing apps. **"zip":** [[:downg#zip_files|CamiAlfa's DownG ZIP]]. Still used by BotoX and many third-party websites, but still does the job for scooters of older generations. Mostly used by Android flashing apps.
  
-**"zip2": **An alteration of the original DownG ZIP format containing parameters of the firmware and a broader selection of scooter "dev" variables to choose from. [missing references about zip2 - separate page needed] +**"zip2": **An alteration of the original DownG ZIP format containing parameters of the firmware and a broader selection of scooter "dev" variables to choose from. [missing references about zip2 - separate page needed]\\
 Most apps should support both versions of DownG ZIP, but using **zip2** is recommended especially on newer scooters to prevent a file from being flashed when it shouldn't - DownG ZIP only having M365 and ES/SNSC as dev variables. It also returns the actual content of the firmware in a human-readable form (//params.txt//), preventing mistakes from happening. Most apps should support both versions of DownG ZIP, but using **zip2** is recommended especially on newer scooters to prevent a file from being flashed when it shouldn't - DownG ZIP only having M365 and ES/SNSC as dev variables. It also returns the actual content of the firmware in a human-readable form (//params.txt//), preventing mistakes from happening.
  
-Both ZIP formats will be delivered with an archive comment consisting of the full request URL, the patcher branch and revision identifiers, as well as a copy of the human-readable parameters**This data is crucial for debugging purposes and must be kept intact!** +**"zip3": **A new open-source firmware container now using json for info storage. It provides hardware compatibility data, as opposed to the sole model check in previous formats. Some apps might not support it yet, but you should be using it when possible to avoid flashing the wrong firmware and bricking your scooter. Detailed documentation is available [[:zip3|here]]. It still returns the actual content of the firmware in a human-readable form (//params.txt//).
- +
-\\ +
  
 +All ZIP formats will be delivered with an archive comment consisting of the full request URL, the patcher branch and revision identifiers, as well as a copy of the human-readable parameters. **This data is crucial for debugging purposes and must be kept intact!**
 ===== DRV versions table ===== ===== DRV versions table =====
  
Line 135: Line 135:
  
 **"on":** DPC is always on. **"on":** DPC is always on.
-===== Output file formats table ===== 
- 
-Case sensitive.\\ 
-Defaults to "**zip2**" if not provided. 
- 
-**"bin": **Barebone final product, binary output. For devs only. 
- 
-**"enc":** Encoded version of the binary. The bare minimum you need to flash a Ninebot scooter, more difficult to use on Xiaomi which has a different encoding rule. Used on Ninebot IAP and Ninebot-Flasher. [missing references about encoding - separate page needed] 
- 
-**"zip":** [[:downg#zip_files|CamiAlfa's DownG ZIP]]. Still used by BotoX and many third-party websites, but still does the job for scooters of older generations. Mostly used by Android flashing apps. 
- 
-**"zip2": **An alteration of the original DownG ZIP format containing parameters of the firmware and a broader selection of scooter "dev" variables to choose from. [missing references about zip2 - separate page needed] 
- 
-Most apps should support both versions of DownG ZIP, but using **zip2** is recommended especially on newer scooters to prevent a file from being flashed when it shouldn't - DownG ZIP only having M365 and ES/SNSC as dev variables. It also returns the actual content of the firmware in a human-readable form (//params.txt//), preventing mistakes from happening. 
- 
-Both ZIP formats will be delivered with an archive comment consisting of the full request URL, the patcher branch and revision identifiers, as well as a copy of the human-readable parameters. **This data is crucial for debugging purposes and must be kept intact!** 
  
 \\ \\
  
  
cfwbuilder.1614191291.txt.gz · Last modified: 2022/01/15 01:33 (external edit)