Differences

This shows you the differences between two versions of the page.

--- guide-pro2 [2021/03/08 08:13] – added dpc reg tidings
+++ guide-pro2 [2021/03/12 19:43] – fixed apk link foxmaster
@@ Line 9: / Line 9: @@
 This tab links straight to Google Play store. It is suggested to use SH utility for flashing the herein generated firmware.
-In case your device does not come with Google Play or Google Service Framework installed, you can download the apk here: [[https://utility.cfw.sh/apk|https://utility.cfw.sh/apk]]
+In case your device does not come with Google Play or Google Service Framework installed, you can download the apk here: [[https://scooterhack.in/utilityapk|https://scooterhack.in/utilityapk]]
 ===== Presets =====
@@ Line 41: / Line 41: @@
 {{https://cloud.scooterhacking.org/tidings/wiki/guides/auximg/pro2/power2.PNG?nolink&}}
 ==== Estimated draw ====
@@ Line 67: / Line 68: @@
       * In direct power mode, your scooter will try to reach the maximum speed possible, until set current limits are reached.
       * DPC mode can be disabled entirely, enabled through boot sequence with brake lever pressed (press the brake lever while turning on the scooter, and keep it pressed for 2 seconds until it’s fully on), or always enabled.
-        * Since 5th March, there's also an additional method of activating DPC using shu app, **Switchable, register** option allows you to enable DPC in the app by activating DPC switch. It can also be automated through the Automation menu.
+        * Since 5th March, there's also an additional method of activating DPC using shu app, **Switchable, register**  option allows you to enable DPC in the app by activating DPC switch. It can also be automated through the Automation menu.
       * There are two response settings for the throttle – flat and quadratic
         * Flat makes the throttle response linear – e.g. throttle at 60% results in 60% of the max current set