guide-pro2
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| guide-pro2 [2021/03/04 06:42] – tidings | guide-pro2 [2022/01/15 01:36] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 9: | Line 9: | ||
| This tab links straight to Google Play store. It is suggested to use SH utility for flashing the herein generated firmware. | This tab links straight to Google Play store. It is suggested to use SH utility for flashing the herein generated firmware. | ||
| - | In case your device does not come with Google Play or Google Service Framework installed, you can download the apk here: [[https://utility.cfw.sh/apk|https://utility.cfw.sh/apk]] | + | In case your device does not come with Google Play or Google Service Framework installed, you can download the apk here: [[https://scooterhack.in/utilityapk|https://scooterhack.in/utilityapk]] |
| ===== Presets ===== | ===== Presets ===== | ||
| Line 39: | Line 39: | ||
| Artificially inflates the firmware version number in order to prevent any official apps from unsolicited upgrading. No side effects are to be expected with sideloading different firmwares. // | Artificially inflates the firmware version number in order to prevent any official apps from unsolicited upgrading. No side effects are to be expected with sideloading different firmwares. // | ||
| ===== Power and Speed ===== | ===== Power and Speed ===== | ||
| + | |||
| + | {{https:// | ||
| ==== Estimated draw ==== | ==== Estimated draw ==== | ||
| Line 47: | Line 49: | ||
| **Current limit** was previously known as //phase current limit //. This is the peak envelope power on the ABC phases, measured by the ESC itself. __Treat this as hard limit, and the estimated draw as soft limit.u When unsure, you can set this to 2-3 times of the estimated draw. | **Current limit** was previously known as //phase current limit //. This is the peak envelope power on the ABC phases, measured by the ESC itself. __Treat this as hard limit, and the estimated draw as soft limit.u When unsure, you can set this to 2-3 times of the estimated draw. | ||
| + | |||
| + | **Recommended values (if you don't know what to do)** | ||
| + | |||
| + | * Sport - Estimated 25A, Limit 65A | ||
| + | * Drive - Estimated 17A, Limit 65A | ||
| + | * Eco - Estimated 10A | ||
| {{https:// | {{https:// | ||
| + | |||
| ==== Max speed ==== | ==== Max speed ==== | ||
| Line 66: | Line 75: | ||
| * In direct power mode, your scooter will try to reach the maximum speed possible, until set current limits are reached. | * In direct power mode, your scooter will try to reach the maximum speed possible, until set current limits are reached. | ||
| * DPC mode can be disabled entirely, enabled through boot sequence with brake lever pressed (press the brake lever while turning on the scooter, and keep it pressed for 2 seconds until it’s fully on), or always enabled. | * DPC mode can be disabled entirely, enabled through boot sequence with brake lever pressed (press the brake lever while turning on the scooter, and keep it pressed for 2 seconds until it’s fully on), or always enabled. | ||
| + | * Since 5th March, there' | ||
| * There are two response settings for the throttle – flat and quadratic | * There are two response settings for the throttle – flat and quadratic | ||
| * Flat makes the throttle response linear – e.g. throttle at 60% results in 60% of the max current set | * Flat makes the throttle response linear – e.g. throttle at 60% results in 60% of the max current set | ||
guide-pro2.1614840160.txt.gz · Last modified: 2022/01/15 01:33 (external edit)