nberrorcodes
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
| nberrorcodes [2019/09/28 23:40] – lothean | nberrorcodes [2020/01/01 19:57] – lothean | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Ninebot ESx/Max Error Codes | + | ====== Ninebot ESx/Max Error Codes ====== |
| ^Code ^Description | ^Code ^Description | ||
| - | |10|No communication with BLE board |Check the connection between dashboard and ESC, [[https:// | + | |10|No communication with BLE board |Check the connection between dashboard and ESC, try to flash ESC with ST-Link ([[https:// |
| |11|Motor phase A current out of range | | | |11|Motor phase A current out of range | | | ||
| |12|Motor phase B current out of range| | | |12|Motor phase B current out of range| | | ||
| Line 8: | Line 8: | ||
| |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected| | |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected| | ||
| |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected| | |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected| | ||
| - | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor| | + | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// |
| |19|Internal battery voltage out of range| | | |19|Internal battery voltage out of range| | | ||
| |20|External battery voltage out of range| | | |20|External battery voltage out of range| | | ||
| - | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace battery| | + | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace |
| - | |22|Internal BMS config invalid|Replace internal BMS or battery| | + | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// |
| - | |23|Internal BMS not activated (has default S/ | + | |23|Internal BMS not activated (has default S/ |
| |24|Supply voltage out of range| | | |24|Supply voltage out of range| | | ||
| - | |26|Flash save error|[[https:// | + | |26|Flash save error|Try to flash ESC with ST-Link ([[https:// |
| - | |27|ESC config invalid|[[https:// | + | |27|ESC config invalid|Try to flash ESC with ST-Link ([[https:// |
| |32|No communication with IoT device|Leave that rental scooter where it belongs| | |32|No communication with IoT device|Leave that rental scooter where it belongs| | ||
| |35|ESC not activated, has default S/ | |35|ESC not activated, has default S/ | ||
| Line 26: | Line 26: | ||
| |41|External battery overheat| | | |41|External battery overheat| | | ||
| |42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws| | |42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws| | ||
| - | |43|External BMS config invalid|Replace external BMS or battery| | + | |43|External BMS config invalid|Replace external BMS or battery; [[https:// |
| - | |44|External BMS not activated (has default S/ | + | |44|External BMS not activated (has default S/ |
| |45|Internal BMS deep cell discharge| | | |45|Internal BMS deep cell discharge| | | ||
| |46|External BMS deep cell discharge| | | |46|External BMS deep cell discharge| | | ||
nberrorcodes.txt · Last modified: 2022/01/15 01:36 by 127.0.0.1