nberrorcodes
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
| nberrorcodes [2019/10/27 20:19] – lothean | nberrorcodes [2020/01/01 19:57] – lothean | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| ^Code ^Description | ^Code ^Description | ||
| - | |10|No communication with BLE board |Check the connection between dashboard and ESC, [[https:// | + | |10|No communication with BLE board |Check the connection between dashboard and ESC, try to flash ESC with ST-Link ([[https:// |
| |11|Motor phase A current out of range | | | |11|Motor phase A current out of range | | | ||
| |12|Motor phase B current out of range| | | |12|Motor phase B current out of range| | | ||
| Line 11: | Line 11: | ||
| |19|Internal battery voltage out of range| | | |19|Internal battery voltage out of range| | | ||
| |20|External battery voltage out of range| | | |20|External battery voltage out of range| | | ||
| - | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace battery| | + | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace |
| |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// | ||
| |23|Internal BMS not activated (has default S/ | |23|Internal BMS not activated (has default S/ | ||
| |24|Supply voltage out of range| | | |24|Supply voltage out of range| | | ||
| - | |26|Flash save error|[[https:// | + | |26|Flash save error|Try to flash ESC with ST-Link ([[https:// |
| - | |27|ESC config invalid|[[https:// | + | |27|ESC config invalid|Try to flash ESC with ST-Link ([[https:// |
| |32|No communication with IoT device|Leave that rental scooter where it belongs| | |32|No communication with IoT device|Leave that rental scooter where it belongs| | ||
| |35|ESC not activated, has default S/ | |35|ESC not activated, has default S/ | ||
nberrorcodes.txt · Last modified: 2022/01/15 01:36 by 127.0.0.1