User Tools

Site Tools


nberrorcodes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
nberrorcodes [2020/04/18 18:30] lotheannberrorcodes [2020/08/29 22:47] – fixed 27 foxmaster
Line 2: Line 2:
  
 ^Code  ^Description  ^Additional information  ^Severity  ^Level  | ^Code  ^Description  ^Additional information  ^Severity  ^Level  |
-|10|No communication with BLE board  |Check the connection between dashboard and ESCtry to flash ESC with ST-Link ([[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=40|ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213|Max]])|System error|3|+|10|Communication Failure between Dashboard and ESC.  |Check the connection between dashboard and ESC. \\ ESC is possibly soft-bricked; try to flash ESC with ST-Link ([[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=40|ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213|Max]])|System error|3|
 |11|Motor phase A current out of range  | |Hardware error|3| |11|Motor phase A current out of range  | |Hardware error|3|
 |12|Motor phase B current out of range| |Hardware error|3| |12|Motor phase B current out of range| |Hardware error|3|
Line 8: Line 8:
 |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected|Hardware error|3| |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected|Hardware error|3|
 |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected|Hardware error|3| |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected|Hardware error|3|
 +|16|Internal Battery change MOS abnormal| |Hardware error|3|
 +|17|External battery change MOS abnormal| |Hardware error|3|
 |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=174&p=992|attempt a fix]]|Hardware error|3| |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=174&p=992|attempt a fix]]|Hardware error|3|
 |19|Internal battery voltage out of range| |Hardware error|3| |19|Internal battery voltage out of range| |Hardware error|3|
 |20|External battery voltage out of range| |Hardware error|3| |20|External battery voltage out of range| |Hardware error|3|
 |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace the battery|Battery mod warning|2| |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace the battery|Battery mod warning|2|
-|22|Internal BMS config invalid|Replace internal BMS or battery; [[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=173|attempt a fix]]|System warning|1| +|22|Internal BMS config invalid|Replace internal BMS or battery; [[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=173|attempt a fix]], or, flash CFW with error raising disabled.|System warning|1| 
-|23|Internal BMS not activated (has default S/N)|Replace internal BMS or battery; [[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=173|attempt a fix]]  |System warning  |1  |+|23|Internal BMS not activated (has default S/N)|Replace internal BMS or battery; [[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=173|attempt a fix]], or, flash CFW with error raising disabled.  |System warning  |1  |
 |24|Supply voltage out of range| |Battery mod warning|2| |24|Supply voltage out of range| |Battery mod warning|2|
 |26|Flash save error|Try to flash ESC with ST-Link ([[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=40|ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213|Max]]), replace ESC|System error|3| |26|Flash save error|Try to flash ESC with ST-Link ([[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=40|ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213|Max]]), replace ESC|System error|3|
-|27|ESC config invalid|Try to flash ESC with ST-Link ([[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=40|ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213|Max]])|System warning|1|+|27|ESC config invalid|Try to flash ESC with ST-Link ([[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=40|ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=213|Max]]) / change SN ([[https://bit.ly/max-unlock|Max]])|System warning|1
 +|28|Motor driver mos up-bridge short circuit|Check motor|Hardware error|3| 
 +|29|Motor driver mos down-bridge short circuit|Check motor|Hardware error|3| 
 +|31|Program skip error|Try to flash ESC|System error|3|
 |32|No communication with IoT device|Leave that rental scooter where it belongs|System error|3| |32|No communication with IoT device|Leave that rental scooter where it belongs|System error|3|
 |35|ESC not activated, has default S/N|[[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=14|for ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=120|for Max]]|System warning|1| |35|ESC not activated, has default S/N|[[https://www.scooterhacking.org/forum/viewtopic.php?f=6&t=14|for ESx]], [[https://www.scooterhacking.org/forum/viewtopic.php?f=26&t=120|for Max]]|System warning|1|
Line 30: Line 35:
 |45|Internal BMS deep cell discharge| |Hardware error|3| |45|Internal BMS deep cell discharge| |Hardware error|3|
 |46|External BMS deep cell discharge| |Hardware error|3| |46|External BMS deep cell discharge| |Hardware error|3|
-|49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System error|1+|48|External battery protection board damaged|Replace external battery or BMS|Hardware error|3| 
-|50|External BMS firmware version mismatch|Change external BMS firmware version|System error|1|+|49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System warning|2
 +|50|External BMS firmware version mismatch|Change external BMS firmware version|System warning|2|
  
 [[https://github.com/etransport/ninebot-docs/wiki/ES2ESC#error-codes|Original source]] [[https://github.com/etransport/ninebot-docs/wiki/ES2ESC#error-codes|Original source]]
nberrorcodes.txt · Last modified: 2022/01/15 01:36 by 127.0.0.1