nberrorcodes
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
nberrorcodes [2020/05/26 21:42] – usernameunavailable | nberrorcodes [2022/01/15 01:36] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 2: | Line 2: | ||
^Code ^Description | ^Code ^Description | ||
- | |10|Communication Failure between Dashboard | + | |10|Communication Failure between Dashboard and ESC. |
|11|Motor phase A current out of range | |Hardware error|3| | |11|Motor phase A current out of range | |Hardware error|3| | ||
|12|Motor phase B current out of range| |Hardware error|3| | |12|Motor phase B current out of range| |Hardware error|3| | ||
Line 8: | Line 8: | ||
|14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected|Hardware error|3| | |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected|Hardware error|3| | ||
|15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected|Hardware error|3| | |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected|Hardware error|3| | ||
+ | |16|Internal Battery change MOS abnormal| |Hardware error|3| | ||
+ | |17|External battery change MOS abnormal| |Hardware error|3| | ||
|18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// | ||
|19|Internal battery voltage out of range| |Hardware error|3| | |19|Internal battery voltage out of range| |Hardware error|3| | ||
|20|External battery voltage out of range| |Hardware error|3| | |20|External battery voltage out of range| |Hardware error|3| | ||
|21|No communication with internal BMS|Check data connector between internal battery and ESC, replace the battery|Battery mod warning|2| | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace the battery|Battery mod warning|2| | ||
- | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// | + | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// |
- | |23|Internal BMS not activated (has default S/ | + | |23|Internal BMS not activated (has default S/ |
|24|Supply voltage out of range| |Battery mod warning|2| | |24|Supply voltage out of range| |Battery mod warning|2| | ||
+ | |25|Communication failure during ESC fimware update|Hard-reset scooter|System error|3| | ||
|26|Flash save error|Try to flash ESC with ST-Link ([[https:// | |26|Flash save error|Try to flash ESC with ST-Link ([[https:// | ||
- | |27|ESC config invalid|Try to flash ESC with ST-Link | + | |27|ESC config invalid |
+ | |28|Motor driver mos up-bridge short circuit|Check motor|Hardware error|3| | ||
+ | |29|Motor driver mos down-bridge short circuit|Check motor|Hardware error|3| | ||
+ | |31|Program skip error|Try to flash ESC|System error|3| | ||
|32|No communication with IoT device|Leave that rental scooter where it belongs|System error|3| | |32|No communication with IoT device|Leave that rental scooter where it belongs|System error|3| | ||
|35|ESC not activated, has default S/ | |35|ESC not activated, has default S/ | ||
Line 22: | Line 28: | ||
|37|Charging base failure or built-in battery charging wire failure.| |Hardware error|3| | |37|Charging base failure or built-in battery charging wire failure.| |Hardware error|3| | ||
|38|Charging overcurrent|Incorrect power supply|Hardware error|3| | |38|Charging overcurrent|Incorrect power supply|Hardware error|3| | ||
- | |39|Internal battery overheat| |Hardware error|3| | + | |39|Internal battery overheat| |Hardware error/battery mod warning|2| |
- | |40|ESC overheat| |Hardware error|3| | + | |40|ESC overheat|Let the scooter cool down / check temperature sensors|Hardware error|3| |
|41|External battery overheat| |Hardware error|3| | |41|External battery overheat| |Hardware error|3| | ||
|42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws|Hardware error|3| | |42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws|Hardware error|3| | ||
Line 30: | Line 36: | ||
|45|Internal BMS deep cell discharge| |Hardware error|3| | |45|Internal BMS deep cell discharge| |Hardware error|3| | ||
|46|External BMS deep cell discharge| |Hardware error|3| | |46|External BMS deep cell discharge| |Hardware error|3| | ||
+ | |47|Internal battery protection board damaged|Replace internal battery or BMS|Hardware error|3| | ||
+ | |48|External battery protection board damaged|Replace external battery or BMS|Hardware error|3| | ||
|49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System warning|2| | |49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System warning|2| | ||
|50|External BMS firmware version mismatch|Change external BMS firmware version|System warning|2| | |50|External BMS firmware version mismatch|Change external BMS firmware version|System warning|2| | ||
+ | |51|BLE firmware incompatible with DRV|Change BLE or DRV firmware|System warning|nd| | ||
+ | |52|BMS firmware incompatible with DRV **(Retail)** / ESC incompatible with battery hatch lock **(Rental)** |Change BMS firmware version **(Retail)** |System warning/ | ||
+ | |54|Motor phase error **(Retail)** / ESC/battery hatch lock communication error **(Rental)** |Check motor-related wiring **(Retail)** |Hardware error|nd| | ||
+ | |55|Battery hatch unlocked| |System warning|nd| | ||
- | [[https:// | + | nd - no data |
\\ | \\ | ||
nberrorcodes.1590529341.txt.gz · Last modified: 2022/01/15 01:34 (external edit)