nberrorcodes
This is an old revision of the document!
Ninebot ESx/Max Error Codes
Code | Description | Additional information | Severity | Level |
---|---|---|---|---|
10 | Communication Failure between Dashboard and ESC. | Check the connection between dashboard and ESC. ESC is possibly soft-bricked; try to flash ESC with ST-Link (ESx, Max) | System error | 3 |
11 | Motor phase A current out of range | Hardware error | 3 | |
12 | Motor phase B current out of range | Hardware error | 3 | |
13 | Motor phase C current out of range | Hardware error | 3 | |
14 | Throttle handle position out of range | Throttle might be stuck, faulty or disconnected | Hardware error | 3 |
15 | Brake handle position out of range | Brake handle might be stuck, faulty or disconnected | Hardware error | 3 |
18 | Motor Hall sensors stuck at 0/1 | Check 2×4 connector between ESC and motor; attempt a fix | Hardware error | 3 |
19 | Internal battery voltage out of range | Hardware error | 3 | |
20 | External battery voltage out of range | Hardware error | 3 | |
21 | No communication with internal BMS | Check data connector between internal battery and ESC, replace the battery | Battery mod warning | 2 |
22 | Internal BMS config invalid | Replace internal BMS or battery; attempt a fix | System warning | 1 |
23 | Internal BMS not activated (has default S/N) | Replace internal BMS or battery; attempt a fix | System warning | 1 |
24 | Supply voltage out of range | Battery mod warning | 2 | |
26 | Flash save error | Try to flash ESC with ST-Link (ESx, Max), replace ESC | System error | 3 |
27 | ESC config invalid | Try to flash ESC with ST-Link (ESx, Max) | System warning | 1 |
32 | No communication with IoT device | Leave that rental scooter where it belongs | System error | 3 |
35 | ESC not activated, has default S/N | for ESx, for Max | System warning | 1 |
36 | 2+4 connector failure or external battery charging wire failure. | Hardware error | 3 | |
37 | Charging base failure or built-in battery charging wire failure. | Hardware error | 3 | |
38 | Charging overcurrent | Incorrect power supply | Hardware error | 3 |
39 | Internal battery overheat | Hardware error | 3 | |
40 | ESC overheat | Hardware error | 3 | |
41 | External battery overheat | Hardware error | 3 | |
42 | No communication with external BMS | Inspect external battery connectors, tighten up external battery screws | Hardware error | 3 |
43 | External BMS config invalid | Replace external BMS or battery; attempt a fix | System warning | 1 |
44 | External BMS not activated (has default S/N) | Replace external BMS or battery; attempt a fix | System warning | 1 |
45 | Internal BMS deep cell discharge | Hardware error | 3 | |
46 | External BMS deep cell discharge | Hardware error | 3 | |
49 | Internal BMS firmware version mismatch | Change internal BMS firmware version | System warning | 2 |
50 | External BMS firmware version mismatch | Change external BMS firmware version | System warning | 2 |
nberrorcodes.1590529505.txt.gz · Last modified: 2022/01/15 01:33 (external edit)