nberrorcodes
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
nberrorcodes [2020/08/31 13:11] – added ESx activation link foxmaster | nberrorcodes [2022/01/15 01:36] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 17: | Line 17: | ||
|23|Internal BMS not activated (has default S/ | |23|Internal BMS not activated (has default S/ | ||
|24|Supply voltage out of range| |Battery mod warning|2| | |24|Supply voltage out of range| |Battery mod warning|2| | ||
+ | |25|Communication failure during ESC fimware update|Hard-reset scooter|System error|3| | ||
|26|Flash save error|Try to flash ESC with ST-Link ([[https:// | |26|Flash save error|Try to flash ESC with ST-Link ([[https:// | ||
- | |27|ESC config invalid|Try to flash ESC with ST-Link | + | |27|ESC config invalid (CPUID register might not match STM CPUID)|Change SN using BLE/UART ([[https:// |
|28|Motor driver mos up-bridge short circuit|Check motor|Hardware error|3| | |28|Motor driver mos up-bridge short circuit|Check motor|Hardware error|3| | ||
|29|Motor driver mos down-bridge short circuit|Check motor|Hardware error|3| | |29|Motor driver mos down-bridge short circuit|Check motor|Hardware error|3| | ||
Line 27: | Line 28: | ||
|37|Charging base failure or built-in battery charging wire failure.| |Hardware error|3| | |37|Charging base failure or built-in battery charging wire failure.| |Hardware error|3| | ||
|38|Charging overcurrent|Incorrect power supply|Hardware error|3| | |38|Charging overcurrent|Incorrect power supply|Hardware error|3| | ||
- | |39|Internal battery overheat| |Hardware error|3| | + | |39|Internal battery overheat| |Hardware error/battery mod warning|2| |
- | |40|ESC overheat| |Hardware error|3| | + | |40|ESC overheat|Let the scooter cool down / check temperature sensors|Hardware error|3| |
|41|External battery overheat| |Hardware error|3| | |41|External battery overheat| |Hardware error|3| | ||
|42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws|Hardware error|3| | |42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws|Hardware error|3| | ||
Line 35: | Line 36: | ||
|45|Internal BMS deep cell discharge| |Hardware error|3| | |45|Internal BMS deep cell discharge| |Hardware error|3| | ||
|46|External BMS deep cell discharge| |Hardware error|3| | |46|External BMS deep cell discharge| |Hardware error|3| | ||
+ | |47|Internal battery protection board damaged|Replace internal battery or BMS|Hardware error|3| | ||
|48|External battery protection board damaged|Replace external battery or BMS|Hardware error|3| | |48|External battery protection board damaged|Replace external battery or BMS|Hardware error|3| | ||
|49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System warning|2| | |49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System warning|2| | ||
|50|External BMS firmware version mismatch|Change external BMS firmware version|System warning|2| | |50|External BMS firmware version mismatch|Change external BMS firmware version|System warning|2| | ||
+ | |51|BLE firmware incompatible with DRV|Change BLE or DRV firmware|System warning|nd| | ||
+ | |52|BMS firmware incompatible with DRV **(Retail)** / ESC incompatible with battery hatch lock **(Rental)** |Change BMS firmware version **(Retail)** |System warning/ | ||
+ | |54|Motor phase error **(Retail)** / ESC/battery hatch lock communication error **(Rental)** |Check motor-related wiring **(Retail)** |Hardware error|nd| | ||
+ | |55|Battery hatch unlocked| |System warning|nd| | ||
- | [[https:// | + | nd - no data |
\\ | \\ | ||
nberrorcodes.1598879469.txt.gz · Last modified: 2022/01/15 01:33 (external edit)