Differences

This shows you the differences between two versions of the page.

--- nbxi-motors [2021/04/26 06:25] – draft so it's not lost tidings
+++ nbxi-motors [2022/01/15 01:36] (current) – external edit 127.0.0.1
@@ Line 17: / Line 17: @@
 === Parameters ===
-Phase-to-phase winding resistance: 0.361mOhm \\ RPM/V: 18.55 \\ Poles/Pole pairs: 30/15 \\ Magnetic slots: 27 \\ Copper wire diameter: 0.5mm \\ Magnet thickness: 25mm \\ Stator diameter: 100mm \\ Ball bearing used: 698zz (SKF 6001-2Z as direct replacement)
+Phase-to-phase winding resistance: 0.361mOhm \\ RPM/V: 18.55 \\ Poles/Pole pairs: 30/15 \\ Magnetic slots: 27 \\ Copper wire diameter: 0.5mm \\ Magnet thickness: 25mm \\ Stator diameter: 100mm \\ Ball bearing used: 698zz (SKF 6001-2Z as direct replacement) \\ Axle: 98mm length, 12mm width
+Rim size: 154mm (6.06", fits 152mm) \\ Circumference: 71cm with 8.5" tire
 === Photos ===
+{{https://cloud.scooterhacking.org/tidings/wiki/motors/m365_swxxw.jpg?nolink&480x640|cloud.scooterhacking.org_tidings_wiki_motors_m365_swxxw.jpg}}
+{{https://cloud.scooterhacking.org/tidings/wiki/motors/m365_stator.jpg?nolink&480x640|cloud.scooterhacking.org_tidings_wiki_motors_m365_stator.jpg}}
+==== M365 Pro 1 ====
+=== S/N format ===
+  * TBA
+=== Parameters ===
+Phase-to-phase winding resistance: TBC mOhm \\ RPM/V: TBC \\ Poles/Pole pairs: 30/15 \\ Magnetic slots: 27 \\ Copper wire diameter: 0.5mm \\ Magnet thickness: 30mm \\ Stator diameter: 100mm \\ Ball bearing used: 698zz (SKF 6001-2Z as direct replacement) \\ Axle: 98mm length, 12mm width
+Rim size: 154mm (6.06", fits 152mm) \\ Circumference: 71cm with 8.5" tire
+=== Photos ===
+{{https://cloud.scooterhacking.org/tidings/wiki/motors/m365pro1_2.jpg?nolink&480x640}}
+{{https://cloud.scooterhacking.org/tidings/wiki/motors/m365pro1_1.jpg?nolink&480x360}}
+{{https://cloud.scooterhacking.org/tidings/wiki/motors/m365pro1_3.jpg?480x640}}