This is an old revision of the document!
ScooterHacking Utility - Functional Testing
Scan Screen
| | v2.0 | comment |
| scooter visible | check | |
| bluetooth icon when scooter not visible | check | |
| changelog | check | |
| menu | | |
| show “only nearby scooters” | check | |
| changelog | x | |
| auto-connect | x | |
| offline CFW manager | x | |
| bluetooth settings | x | not existing anymore |
main app
tab 1 - "about"
| | v2.0 | comment |
| menu | | |
| Enroll in testing | | |
| Copy UID to clipboard | check | |
| Credits | check | |
| About | check | |
| Change Name | check / x | Name change is done, app redirects to scan screen, crashes |
| Scooter | | |
| model | check | |
| BLE | check | |
| DRV | check | |
| BMS | check | |
| eBMS | check / x | visibile on DRV155 |
| Serial number | check | |
| ESC region | check | |
| Error code | check | |
| | v2.0 | comment |
| change region | | |
| custom | check | no invalid input protection |
| DE –> Global –> DE | check | |
| German Maneuver | check | |
| Open Dashboard APP | check | |
| Commands | | |
| Reboot | check | |
| shutdown | check / x | shutdown works, scooter still visible on scan screen |
| Automate | | |
| German Maneuver | check | connection crashes on reconnect |
| DPC reg | check | |
| Buttons | | |
| Lock | check | |
| Cruise Control | check | |
| Always active tail light | check | |
| Direct Power Control (CFW) | check | |
| Show speed as mph | check | |
| KERS level | check | |
| Global speed limit | check | |
tab 3 - "flash"
| | v2.0 | comment |
| Source | check | tested with fw from mi.cfw.sh |
| Type | check | tested with fw from mi.cfw.sh |
| Name | check | tested with fw from mi.cfw.sh |
| show params | check | |
| load zip | check | |
| load originial | | |
| BLE | check | tested with 1.2.9 + 1.3.4 |
| BMS | x | tested with 1.2.8 + 1.4.1 |
| DRV | check | tested with 1.5.5 |
| load custom | | |
| install / update SHFW | check | |
| legacy custom firmware | check | |
tab 4 - "config"
| | v2.0 | comment |
| profile editor | | |
| select profile | check | |
| rename profile | check | |
| copy into | check | only tested with speed limit |
| select mode | check | |
| speed limit | check | |
| throttle mode | | |
| speed based | check | |
| power based | check | |
| auto curve builder | check | |
| advanced | check | |
| motor start speed | check | |
| cruise control | | |
| cruise control mode | check | |
| increase / decrease cc speed | check | |
| speed-based cc in dpc | check | |
| cruise control beep | check | |
| modes | | |
| set mode when entering profile | check | |
| disable modes | check | |
| lights | | |
| brake light mode | check / x | static brake light needs always active brake light |
| always active brake light | check | |
| always on headlight | check | |
| | | |
other bugs
