Differences

This shows you the differences between two versions of the page.

--- xiaoerrorcodes [2020/05/26 21:41] – usernameunavailable
+++ xiaoerrorcodes [2020/06/15 23:51] – created lothean
@@ Line 1: / Line 1: @@
-====== Xiaomi M-series Error codes ======
+Moved to [[mierrorcodes|]].
-^Code^Description^^Additional information^^|
-^10|No communication between BLE and ESC||Check the connection between BLE and ESC|||
-^11|Motor phase A current out of range|| |||
-^12|Motor phase B current out of range|| |||
-^13|Motor phase C current out of range|| |||
-^14|Throttle handle position out of range||Throttle might be stuck, faulty or disconnected|||
-^15|Brake handle position out of range||Brake handle might be stuck, faulty or disconnected|||
-^18|Motor sensor read abnormal|| |||
-^21|No communication with internal BMS||Check data connector between internal battery and ESC, replace the battery|||
-^22|Inernal BMS config invalid||Replace internal BMS or battery|||
-^23|Internal BMS not activated (has default S/N)||Replace internal BMS or battery/change SN|||
-^24|Charger voltage abnormal|| |||
-^26|Flash save error||Try to flash ESC with ST-Link/replace ESC|||
-^27|ESC config invalid||Try to flash ESC with ST-Link/replace ESC|||
-^28|MOSFET status abnormal|| |||
-^29|MOSFET low status abnormal|| |||
-^35|ESC not activated, has default S/N|| |||
-^39|Battery temperature abnormal|| |||
-^40|Controller temperature abnormal|| |||
-\\