xiaoerrorcodes
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
xiaoerrorcodes [2020/05/26 21:41] – usernameunavailable | xiaoerrorcodes [2022/01/15 01:36] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Xiaomi M-series Error codes ====== | + | Moved to [[mierrorcodes|]]. |
- | + | ||
- | ^Code^Description^^Additional information^^| | + | |
- | ^10|No communication between BLE and ESC||Check the connection between BLE and ESC||| | + | |
- | ^11|Motor phase A current out of range|| ||| | + | |
- | ^12|Motor phase B current out of range|| ||| | + | |
- | ^13|Motor phase C current out of range|| ||| | + | |
- | ^14|Throttle handle position out of range||Throttle might be stuck, faulty or disconnected||| | + | |
- | ^15|Brake handle position out of range||Brake handle might be stuck, faulty or disconnected||| | + | |
- | ^18|Motor sensor read abnormal|| ||| | + | |
- | ^21|No communication with internal BMS||Check data connector between internal battery and ESC, replace the battery||| | + | |
- | ^22|Inernal BMS config invalid||Replace internal BMS or battery||| | + | |
- | ^23|Internal BMS not activated (has default S/ | + | |
- | ^24|Charger voltage abnormal|| ||| | + | |
- | ^26|Flash save error||Try | + | |
- | ^27|ESC config invalid||Try to flash ESC with ST-Link/ | + | |
- | ^28|MOSFET status abnormal|| ||| | + | |
- | ^29|MOSFET low status abnormal|| ||| | + | |
- | ^35|ESC not activated, has default S/N|| ||| | + | |
- | ^39|Battery temperature abnormal|| ||| | + | |
- | ^40|Controller temperature abnormal|| ||| | + | |
- | + | ||
- | \\ | + | |
xiaoerrorcodes.txt · Last modified: 2022/01/15 01:36 by 127.0.0.1