nberrorcodes
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
nberrorcodes [2019/10/27 20:19] – lothean | nberrorcodes [2020/01/01 19:57] – lothean | ||
---|---|---|---|
Line 2: | Line 2: | ||
^Code ^Description | ^Code ^Description | ||
- | |10|No communication with BLE board |Check the connection between dashboard and ESC, [[https:// | + | |10|No communication with BLE board |Check the connection between dashboard and ESC, try to flash ESC with ST-Link ([[https:// |
|11|Motor phase A current out of range | | | |11|Motor phase A current out of range | | | ||
|12|Motor phase B current out of range| | | |12|Motor phase B current out of range| | | ||
Line 8: | Line 8: | ||
|14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected| | |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected| | ||
|15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected| | |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected| | ||
- | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// | + | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// |
|19|Internal battery voltage out of range| | | |19|Internal battery voltage out of range| | | ||
|20|External battery voltage out of range| | | |20|External battery voltage out of range| | | ||
- | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace battery| | + | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace |
|22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// | ||
|23|Internal BMS not activated (has default S/ | |23|Internal BMS not activated (has default S/ | ||
|24|Supply voltage out of range| | | |24|Supply voltage out of range| | | ||
- | |26|Flash save error|[[https:// | + | |26|Flash save error|Try to flash ESC with ST-Link ([[https:// |
- | |27|ESC config invalid|[[https:// | + | |27|ESC config invalid|Try to flash ESC with ST-Link ([[https:// |
|32|No communication with IoT device|Leave that rental scooter where it belongs| | |32|No communication with IoT device|Leave that rental scooter where it belongs| | ||
|35|ESC not activated, has default S/ | |35|ESC not activated, has default S/ |
nberrorcodes.txt · Last modified: 2022/01/15 01:36 by 127.0.0.1