nberrorcodes
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
| nberrorcodes [2019/10/27 20:19] – lothean | nberrorcodes [2020/05/26 21:47] – usernameunavailable | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Ninebot ESx/Max Error Codes ====== | ====== Ninebot ESx/Max Error Codes ====== | ||
| - | ^Code ^Description | + | ^Code ^Description |
| - | |10|No communication with BLE board | + | |10|Communication Failure between Dashboard and ESC. |
| - | |11|Motor phase A current out of range | | | + | |11|Motor phase A current out of range | |Hardware error|3| |
| - | |12|Motor phase B current out of range| | | + | |12|Motor phase B current out of range| |
| - | |13|Motor phase C current out of range| | + | |13|Motor phase C current out of range| |
| - | |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected| | + | |14|Throttle handle position out of range|Throttle might be stuck, faulty or disconnected|Hardware error|3| |
| - | |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected| | + | |15|Brake handle position out of range|Brake handle might be stuck, faulty or disconnected|Hardware error|3| |
| - | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// | + | |18|Motor Hall sensors stuck at 0/1|Check 2×4 connector between ESC and motor; [[https:// |
| - | |19|Internal battery voltage out of range| | | + | |19|Internal battery voltage out of range| |
| - | |20|External battery voltage out of range| | | + | |20|External battery voltage out of range| |
| - | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace battery| | + | |21|No communication with internal BMS|Check data connector between internal battery and ESC, replace |
| - | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// | + | |22|Internal BMS config invalid|Replace internal BMS or battery; [[https:// |
| - | |23|Internal BMS not activated (has default S/ | + | |23|Internal BMS not activated (has default S/ |
| - | |24|Supply voltage out of range| | | + | |24|Supply voltage out of range| |
| - | |26|Flash save error|[[https:// | + | |26|Flash save error|Try to flash ESC with ST-Link ([[https:// |
| - | |27|ESC config invalid|[[https:// | + | |27|ESC config invalid|Try to flash ESC with ST-Link ([[https:// |
| - | |32|No communication with IoT device|Leave that rental scooter where it belongs| | + | |32|No communication with IoT device|Leave that rental scooter where it belongs|System error|3| |
| - | |35|ESC not activated, has default S/ | + | |35|ESC not activated, has default S/ |
| - | |36|2+4 connector failure or external battery charging wire failure.| | | + | |36|2+4 connector failure or external battery charging wire failure.| |
| - | |37|Charging base failure or built-in battery charging wire failure.| | | + | |37|Charging base failure or built-in battery charging wire failure.| |
| - | |38|Charging overcurrent|Incorrect power supply| | + | |38|Charging overcurrent|Incorrect power supply|Hardware error|3| |
| - | |39|Internal battery overheat| | | + | |39|Internal battery overheat| |
| - | |40|ESC overheat| | | + | |40|ESC overheat| |
| - | |41|External battery overheat| | | + | |41|External battery overheat| |
| - | |42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws| | + | |42|No communication with external BMS|Inspect external battery connectors, tighten up external battery screws|Hardware error|3| |
| - | |43|External BMS config invalid|Replace external BMS or battery; [[https:// | + | |43|External BMS config invalid|Replace external BMS or battery; [[https:// |
| - | |44|External BMS not activated (has default S/ | + | |44|External BMS not activated (has default S/ |
| - | |45|Internal BMS deep cell discharge| | | + | |45|Internal BMS deep cell discharge| |
| - | |46|External BMS deep cell discharge| | | + | |46|External BMS deep cell discharge| |
| - | |49|Internal BMS firmware version mismatch|Change internal BMS firmware version| | + | |49|Internal BMS firmware version mismatch|Change internal BMS firmware version|System warning|2| |
| - | |50|External BMS firmware version mismatch|Change external BMS firmware version| | + | |50|External BMS firmware version mismatch|Change external BMS firmware version|System warning|2| |
| [[https:// | [[https:// | ||
nberrorcodes.txt · Last modified: 2022/01/15 01:36 by 127.0.0.1