Differences

This shows you the differences between two versions of the page.

--- shfw020guide [2021/12/21 20:18] – paulederbaus
+++ shfw020guide [2022/01/15 01:36] (current) – external edit 127.0.0.1
@@ Line 10: / Line 10: @@
 Here is how everything works:
-===== Profile Editor =====
+===== Profile Settings =====
+==== Profile Editor ====
 __Functions__:
@@ Line 17: / Line 19: @@
   * rename profiles
   * copy profiles into others
-  * reset profile
+  * reset profil
+{{:shfw_020_guide_profile-editor.mp4|shfw_020_guide_profile-editor.mp4}}
+==== Throttle and Brake ====
+__Functions__:
+  * set speed limit
+  * set throttle mode for each profile (speed based / dpc)
+  * set current limit (speed based)
+  * set current curve with auto curve builder or advanced
+{{:shfw_020_guide_throttle-brake.mp4|shfw_020_guide_throttle-brake.mp4}}
+==== Motor start speed ====
+__Functions__:
+  * set motor start speed
+{{:shfw_020_guide_msp.mp4|shfw_020_guide_MSP.mp4}}
+==== Cruise control ====
+__Functions__:
+  * set cruise control mode (off, time, single tab, double tab)
+  * activate increase/decrease CC speed with throttle
+  * change cc behavior in DPC to speed based
+  * select cruise control beep type
+{{:shfw_020_guide_cruisecontrol.mp4|shfw_020_guide_cruisecontrol.mp4}}
+==== Modes ====
+__Functions__:
+  * select mode when entering profile (last, sports, drive, eco)
+  * disable modes (only sports mode)
+{{:shfw_020_guide_modes.mp4|shfw_020_guide_modes.mp4}}
+==== Lights ====
+__Functions__:
+  * select brake light mode (default, static, reversed, strobe, German)
+  * brake light flash speed (default, reversed, strobe)
+  * activate always active brake light
+  * activate always active headlight
+{{:shfw_020_guide_lights.mp4|shfw_020_guide_lights.mp4}}
+==== User Interface ====
+__Functions__:
+  * choose the main dash data (displayed over motor start speed)
+  * choose the idle dash data (displayed below motor start speed)
+  * choose alternating dash data (shown as error message)
+  * select beep type when entering the profile
+  * disable reboot or shutdown beep
+  * swap the power button function
+{{:shfw_020_guide_user-interface.mp4|shfw_020_guide_user-interface.mp4}}
+===== Global Settings =====
+==== Profile triggers ====
+__Functions__:
+  * select active profile
+  * choose which profile is selected at boot
+  * choose which profile is selected at boot with brake pressed
+  * choose which profile is selected at boot with throttle pressed
+  * choose which profile is selected at boot with brake and throttle pressed
+{{:shfw_020_guide_profile-triggers.mp4|shfw_020_guide_profile-triggers.mp4}}
+==== System settings ====
+__Functions__:
+  * activate error suppression (16, 17, 19, 21, 22, 23, 27, 35, 39, 43, 44)
+  * change ADC resistor divider voltage (Change with caution!)
+{{:shfw_020_guide_system-settings.mp4|shfw_020_guide_system-settings.mp4}}
+==== Wheel size ====
+__Functions__:
+  * set your current wheel size
+{{:shfw_020_guide_wheelsize.mp4|shfw_020_guide_wheelsize.mp4}}
+==== BMS emulation ====
+__Functions__:
+  * choose your battery configuration (10S til 20S)
+  * enter your battery capacity
+  * choose your max cell voltage
+  * choose your min cell voltage
-{{:test_part1.mp4|test_part1.mp4}}
+{{:shfw_020_guide_BMS-emulation.mp4|shfw_020_guide_BMS-emulation.mp4}}